Montero SR 4WD V6-3.5L SOHC (1997)
A. Hose E/hose D/return pipe B/feed pipe B installation. (12, 13, 14 & 15)
When connecting hoses to pipes with a stepped part, insert securely as far as the stepped part.
B. Return pipe A/feed pipe A/clamp installation. (4, 5 & 6)
1. Provisionally tighten the return pipe A and feed pipe A flare nuts to the transmission and transfer, and after clamping the pipes with each
clamp, fully tighten the flare nuts.
Also, tighten all of the clamps, starting with those that are the closest to the transmission and transfer assembly.
2. When connecting the pipes to the hoses, insert securely as far as the stepped part.
C. Hose C/hose B/hose A installation. (1, 2 & 3)
When connecting the pipes to the hoses, insert securely as far as the stepped part.
NOTE: Operational steps after installation as follows:
1. Fill and bleed automatic transmission fluid.
2. Install under cover and under skid plate.