Montero SR 4WD V6-3.5L SOHC (1997)
![background image](/mitsubishi/montero_sr_4wd/v6-3.5l_sohc/Page-1465004.png)
3. Install the snap ring on the opposite side, and measure the clearance of the snap ring groove with a thickness gage.
Standard value: 0.06 mm (0.0024 inch) or less.
CAUTION: Always use snap rings of equal thicknesses on both sides.
4. If the clearance exceeds the standard value, adjust by changing the thickness of the snap ring.