Montero SR 4WD V6-3.5L SOHC (1997)
3.
Use a plastic trim stick to gently lift the outer edge of the moulding. Apply a bead of 3M 08661 silicone sealant or equivalent between the
moulding and the glass.
4
Push the moulding down to ensure it is securely sealed onto the glass. If necessary, temporarily apply masking tape to secure the moulding while
the sealant sets.
5.
Allow the sealant to set undisturbed for the length of time specified in the manufacturer's instructions. Then remove tape if applied.
WARRANTY INFORMATION
Windshield Moulding Sealant
Cause Code: 990
Labor Operation No. 42312100
Time Allowance: 0.5 hr.
Warranty Coverage:36 months/36,000 miles.
Special Warranty Information: Normal warranty procedures apply.