mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4168 > < Initial Inspection and Diagnostic Overview|Page 4166
Page 3
background image

3. Depress the brake pedal and hold it.
4. Turn the ignition switch to "ON" position.
5. After turning the ignition switch to "ON," release the pedal within three seconds. Repeat this process of pressing and releasing the brake pedal 10

continuous times.

6. Turn the ignition switch to "LOCK" (OFF) position.
7. Disconnect special tool MB991529.

Initial Inspection and Diagnostic Overview|Page 4168 > < Initial Inspection and Diagnostic Overview|Page 4166