Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 12. Check the power window relay connector D-219 and power window main switch connector H-05 for damage.
Q: Are power window relay connector D-219 and power window main switch connector H-05 in good condition?
YES: Go to Step 13.
NO: Repair or replace them. Refer to Harness Connector Inspection. The power windows should work normally.
STEP 13. Check the harness wires between power window relay connector D-219 and power window main switch connector H-05.
NOTE: After checking junction block connector D-208 and intermediate connector D-25, check the wires. If junction block connector D-208 and
intermediate connector D-25 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between power window relay connector D-219 and power window main switch connector H-05 in good condition?
YES: Replace the ETACS-ECU. The power windows should work normally.
NO: Repair them. The power windows should work normally.
Inspection Procedure D-2
Power window relay: Power window timer function does not work normally
