Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 2. Check the sunroof motor assembly connector F-02 for damage.
Q: Is sunroof motor assembly connector F-02 in good condition?
YES: Go to Step 3.
NO: Repair or replace it. Refer to Harness Connector Inspection. The sunroof should work normally.
STEP 3. Check the harness wires between sunroof motor assembly connector F-02 and fusible link (4).
NOTE: After checking intermediate connectors F-24, D-26 and D-28, check the wires. If intermediate connectors F-24, D-26 and D-28 are damaged,
repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between sunroof motor assembly connector F-02 and fusible link (4) in good condition?
YES: There is no action to be taken.
NO: Repair or replace them. The sunroof should work normally.