Montero XLS 4WD V6-3.5L SOHC (2001)
YES: Go to Step 17.
NO: Repair or replace it. Refer to Harness Connector Inspection. The sunroof should work normally.
STEP 17. Check the harness wires between sunroof switch connector F-01 and ground.
NOTE: After checking intermediate connectors F-24 and D-26, check the wires. If intermediate connectors F-24 and D-26 are damaged, repair or
replace them. Refer to Harness Connector Inspection.
Q: Are the harness wire between sunroof switch connector F-01 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The sunroof should work normally.
STEP 18. Check the sunroof switch connector F-01 and sunroof motor assembly connector F-02 for damage.
Q: Are sunroof switch connector F-01 and sunroof motor assembly connector F-02 in good condition?
YES: Go to Step 19.
NO: Repair or replace them. Refer to Harness Connector Inspection. The sunroof should work normally.
