mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2109 > < Initial Inspection and Diagnostic Overview|Page 2107
Page 79
background image

STEP 8. Check washer motor connector A-33 and front-ECU connector A-08X for damage.

Q: Are washer motor connector A-33 and front-ECU connector A-08X in good condition?

YES: Go to Step 9.
NO: Repair or replace them. Refer to Harness Connector Inspection. The windshield washer should work normally.

STEP 9. Check the harness wire between washer motor connector A-33 and front-ECU connector A-08X.

Q: Is the harness wire between washer motor connector A-33 and front-ECU connector A-08X in good condition?

YES: There is no action to be taken.
NO: Repair them. The windshield washer should work normally.

Inspection Procedure H-1

Rear wiper and washer: Rear wiper does not work at all

Initial Inspection and Diagnostic Overview|Page 2109 > < Initial Inspection and Diagnostic Overview|Page 2107