Montero XLS 4WD V6-3.5L SOHC (2001)
YES: Go to Step 8.
NO: Go to Step 6.
STEP 6. Check the theft-alarm horn relay connector A-11X for damage.
Q: Is theft-alarm horn relay connector A-11X in good condition?
YES: Go to Step 7.
NO: Repair or replace it. Refer to Harness Connector Inspection. The horn should sound when the theft-alarm system is triggered.
STEP 7. Check the harness wire between theft-alarm horn relay connector A-11X and fusible link (2).
Q: Is the harness wire between theft-alarm horn relay connector A-11X and fusible link (2) in good condition?
YES: There is no action to be taken.
NO: Repair it. The horn should sound when the theft-alarm system is triggered.
STEP 8. Check the theft-alarm horn relay connector A-11X and ETACS-ECU connector D-223 for damage.