Montero XLS 4WD V6-3.5L SOHC (2001)
Q: Are fog light switch connector D-127 and ETACS-ECU connector D-224 in good condition?
YES: Go to Step 6.
NO: Repair or replace them. Refer to Harness Connector Inspection. The fog light switch input signal should be able to be checked and the fog lights
should work normally.
STEP 6. Check the harness wire between fog light switch connector D-127 and ETACS-ECU connector D-224.
Q: Is the harness wire between fog light switch connector D-127 and ETACS-ECU connector D-224 in good condition?
YES: Replace the ETACS-ECU. The fog light switch input signal should be able to be checked and the fog lights should work normally.
NO: Repair it. The fog light switch input signal should be able to be checked and the fog lights should work normally.
Inspection Procedure Q-6
The Park/neutral position switch "R" position signal is not sent to the ETACS-ECU