Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 5. Check park/neutral position switch connector C-04 and ETACS-ECU connector D-224 for damage.
Q: Are park/neutral position switch connector C-04 and ETACS-ECU connector D-224 in good condition?
YES: Go to Step 6.
NO: Repair or replace them. Refer to Harness Connector Inspection. The park/neutral position switch "R" position signal should be able to be
checked and the rear wiper should work normally.
STEP 6. Check the harness wires between park/neutral position switch connector C-04 and ETACS-ECU connector D-224.