mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2229 > < Initial Inspection and Diagnostic Overview|Page 2227
Page 199
background image

STEP 7. Check the harness wires between front passenger's door switch connector F-22 and ETACS-ECU connectors D-222 and D-224.

NOTE:  After checking intermediate connector D-11, joint connector D-01 and junction block connector D-209, check the wires. If intermediate
connector D-111, joint connector D-01 and junction block connector D-209 are damaged, repair or replace them. Refer to Harness Connector Inspection

Q: Are the harness wires between front passenger's door switch connector F-22 and ETACS-ECU connector D-222 and D-224 in good
condition?

Initial Inspection and Diagnostic Overview|Page 2229 > < Initial Inspection and Diagnostic Overview|Page 2227