Montero XLS 4WD V6-3.5L SOHC (2001)
Connector Inspection.
Q: Are the harness wires between rear door lock actuator switch (RH) connector H-21 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The input signal from the rear door lock actuator switch (RH) should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
STEP 24. Check the rear door lock actuator switch (RH) connector H-21 and ETACS-ECU connector D-223 for damage.
Q:
YES: Go to Step 25.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the rear door lock actuator switch (RH) should be able to
be checked and the functions, which are described in the "Technical Description (comment)," should work normally.
STEP 25. Check the harness wires between rear door lock actuator switch (RH) connector H-21 and ETACS-ECU connector D-223.
