Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 5. Check the harness wires between power window main switch connector H-05 and ground.
NOTE: After checking intermediate connector D-25, check the wires. If intermediate connector D-25 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between power window main switch connector H-05 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The door lock switch input signal should be able to be checked and the central door locking system should work normally.
STEP 6. Check the power window main switch connector H-05 and ETACS-ECU connector D-223 for damage.
Q: Are power window main switch connector H-05 and ETACS-ECU connector D-223 in good condition?
YES: Go to Step 7.
NO: Repair or replace them. Refer to Harness Connector Inspection. The door lock switch input signal should be able to be checked and the central
door locking system should work normally.