Montero XLS 4WD V6-3.5L SOHC (2001)
Hood Switch Input Circuit
CIRCUIT OPERATION
The ETACS-ECU uses the input signal from the hood switch to arm the theft-alarm system.
TECHNICAL DESCRIPTION (COMMENT)
The hood switch input signal is used to arm the theft-alarm system. If the input signal is an error, the theft-alarm system will not be armed normally.
TROUBLESHOOTING HINTS
-
Malfunction of the hood switch
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991529: Diagnostic Trouble Code Check Harness