Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 2. Check sunroof motor assembly connector F-02 and ETACS-ECU connector D-224 for damage.
Q: Are sunroof motor assembly connector F-02 and ETACS-ECU connector D-224 in good condition?
YES: Go to Step 3.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the sunroof switch should be able to be checked and the
sunroof should work normally.
STEP 3. Check the harness wires between sunroof motor assembly connector F-02 and ETACS-ECU connector D-224.
NOTE: After checking intermediate connectors F-24 and D-26 and joint connector D-02, check the wires. If intermediate connectors F-24 and D-26
and joint connector D-02 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between sunroof motor assembly connector F-02 and ETACS-ECU connector D-224 in good condition?
YES: Go to Step 4.
NO: Repair them. The input signal from the sunroof switch should be able to be checked and the sunroof should work normally.
STEP 4. Replacement of ECU
1. Replace the sunroof motor assembly.
