Montero XLS 4WD V6-3.5L SOHC (2001)
Clockspring Assembly / Spiral Cable: Service and Repair
REMOVAL AND INSTALLATION
WARNING:
-
Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
-
Do not drop the air bag modules or clock spring or allow contact with water, grease or oil.
-
Replace it if a dent, crack, deformation or rust is detected.
-
The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top
of it.
-
Do not expose the air bag modules to temperatures over 93 °C(200 °F).
-
After deployment of an air bag, replace the air bag modules. Check the clock spring and if faulty, replace it with a new part.
-
Wear gloves and safety glasses when handling air bags that have already deployed.
-
An undeployed air bag module should only be disposed of in accordance with the procedures described.
<Side air bag module>
For removal and installation of the front seatback assembly with side air bag module, refer to Front seat.
