Montero XLS 4WD V6-3.5L SOHC (2001)
Impact Sensor: Service and Repair
Front Impact Sensor
REMOVAL AND INSTALLATION
WARNING:
-
Never repair or disassemble the front impact sensor. If faulty, replace it.
-
Handle the front impact sensors very carefully, taking care not to drop them or otherwise a new one is required.
-
Replace the sensors with new ones after the air bag has deployed.
REMOVAL SERVICE POINT
[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and air bag(s) deployment.
INSTALLATION SERVICE POINTS