Montero XLS 4WD V6-3.5L SOHC (2001)
Revised Image
REMOVAL AND INSTALLATION
CAUTION: To prevent bushings from breakage, the parts indicated by * should be temporarily tightened, and then fully tightened with the vehicle
on the around in the unladen condition.
Removal Service Points
<<A>> Tie Rod End And Knuckle Assembly/Lower Arm Ball Joint And Knuckle Assembly Disconnection
CAUTION:
^
To prevent the ball joint screw from damage, only loosen but do not remove the connecting nut of the tie rod end, knuckle and lower arm from
the ball joint and use the special tool.
^
Support the special tool with a cord to prevent it from coming off.