Montero XLS 4WD V6-3.5L SOHC (2001)
Trailing Arm: Service and Repair
REMOVAL AND INSTALLATION
CAUTION: * Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in an unladen condition.
TRAILING ARM BUSHING REPLACEMENT
1. Use special tool MD998236 to drive in/out the bushing from/to the trailing arm.
2. When assembling, apply soapy water around the bushing and the inner diameter of the trailing arm, and then drive in the bushing so that it
protrudes by the same amount at either side and its hollow part is as shown.