Montero XLS 4WD V6-3.5L SOHC (2001)
Inspection Procedure 3
Inspection Procedure 3
Selector lever can be moved from "P" to "R" with brake pedal depressed when ignition key is at "LOCK" (OFF) position.
TECHNICAL DESCRIPTION (COMMENT)
^
Key interlock cable or lock cam may be defective.
TROUBLESHOOTING HINTS
^
Malfunction of lock cam
^
Malfunction of shift lock cable
DIAGNOSIS
Check items described in the column "Troubleshooting Hints. " When the brake pedal is depressed with the ignition key at the "LOCK" (OFF) , check
that the selector lever can not be moved from "P" position to "R" position.
Inspection Procedure 4
Inspection Procedure 4
Selector lever cannot be moved from "P" to "R" smooth
TECHNICAL DESCRIPTION (COMMENT)
^
Key interlock cable, shift lock cable, lock cam or selector lever assembly may be defective.
TROUBLESHOOTING HINTS
^
Malfunction of key interlock cable
^
Malfunction of shift lock cable
^
Malfunction of lock cam
^
Malfunction of selector lever assembly
DIAGNOSIS
Check items described in the column "Troubleshooting Hints." Check that the selector lever can be moved from "P" position to "R" position smoothly.
Inspection Procedure 5
Inspection Procedure 5
Selector lever cannot be moved from "R" to "P"
TECHNICAL DESCRIPTION (COMMENT)
Selector lever assembly or transmission control cable may be defective.
TROUBLESHOOTING HINTS
^
Malfunction of selector lever assembly
^
Malfunction of transmission control cable
DIAGNOSIS
Check items described in the column "Troubleshooting Hints. " Check that the selector lever can be moved from "R" position to "P" position.
Inspection Procedure 6
Inspection Procedure 6
Ignition key cannot be turned to "LOCK" (OFF) position when selector lever is at "P" position.
TECHNICAL DESCRIPTION (COMMENT)
Lock cam, key cylinder cover or key interlock cable may be defective.
TROUBLESHOOTING HINTS
^
Malfunction of lock cam
^
Malfunction of key interlock cable
^
Malfunction of key cylinder slider
DIAGNOSIS
Check items described in the column "Troubleshooting Hints." Check that the ignition key can not be turned to the "LOCK" (OFF) position with the
selector lever at "P" position.
Inspection Procedure 7