Montero XLS 4WD V6-3.5L SOHC (2001)
Wiper Motor: Testing and Inspection
Windshield Wiper and Washer
The windshield wiper motor assembly should be installed to the vehicle body and the harness connector should be disconnected when checking the wiper
motor.
Wiper Motor at Low-Speed and High-Speed Operation
Connect the battery to the wiper motor as shown in the illustration, and then check the operation of the wiper motor at low speed and at high speed.
Wiper Motor at Stop Position Operation
1. Connect the battery to the wiper motor as shown in illustration (A), and then run the wiper motor at low speed. Then, while the motor is operating,
disconnect the battery to make the wiper motor stop.
2. Connect the terminals and the battery as shown in illustration (B), and then check whether the wiper motor automatically stops in the correct stop
position after it has been running at low speed.