Outlander 2WD V6-3.0L (6B31) (2007)
Hands Free Module Power Supply Circuit
CIRCUIT OPERATION
-
The power supply to the hands-free module is provided by the fusible link (36).
-
If the power supply system from the battery is defective, the system operates by the power supply from the ignition switch (IG1).
TECHNICAL DESCRIPTION (COMMENT)
If the hands-free cellular phone system don't work, power supply and ground system to the hands-free module, or the hands-free module itself may be
defective.
TROUBLESHOOTING HINTS
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
-
The hands-free module may be defective
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
-
MB992006: Extra Fine Probe
STEP 1. Check hands-free module connector C-121 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is hands-free module connector C-121 in good condition?