Outlander 2WD V6-3.0L (6B31) (2007)
Body Control Systems: Overhaul
TRANSMITTER
DISASSEMBLY SERVICE POINTS
Post-installation Operation
Disassembly Steps 1-4
[[A]] UPPER COVER REMOVAL
CAUTION: To prevent damage to the transmitter, wrap a flat-tipped screwdriver with protective tape before prying.
Insert a flat-tipped screwdriver in the area shown, and remove the upper cover by prying it with the screwdriver.
[[B]] BATTERY REMOVAL
CAUTION:
-
Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic
device.
-
To prevent damage to the transmitter assembly, wrap a flat-tipped screwdriver with protective tape before prying.