Outlander 2WD V6-3.0L (6B31) (2007)
INSTALLATION SERVICE POINTS
>>A<< SNAP PIN INSTALLATION
1. Install the snap pin as shown in the figure.
>>B<< CHECK VALVE/VACUUM HOSE INSTALLATION
1. Install the check valve to the brake booster as shown in the figure.
2. As shown in the figure, insert the brake booster-side vacuum hose into the brake booster check valve with its yellow mark facing the vehicle front,
and fix with a hose clip. Insert the inlet manifold-side vacuum hose into the vacuum pipe with the white marks aligned, and fix with a hose clip.