Outlander 2WD V6-3.0L (6B31) (2007)
Q: Does the measured resistance value correspond with this range?
YES: Go to Step 14.
NO: Go to Step 13.
STEP 13. Check the wiring harness between AC inverter connector D-128 (terminal No. 4,11) and AC outlet connector D-103 (terminal No.
3,1).
Q: Is the wiring harness between AC inverter connector D-128 (terminal No. 4,11) and AC outlet connector D-103 (terminal No. 3,1) in good
condition?
YES: Go to Step 14.
NO: Repair the wiring harness between AC inverter connector D-128 and AC outlet connector D-103.
STEP 14. Retest the system
Q: After the AC outlet replacement, does the AC power supply operate normally?
YES: The trouble can be an intermittent malfunction (Refer to How to use Troubleshooting/inspection Service Points - How to Cope with
Intermittent Malfunction).
NO: Replace the AC inverter.