Outlander 2WD V6-3.0L (6B31) (2007)
/Page-711002.png)
<<A>> BREAK-OFF BOLTS REMOVAL <VEHICLES FOR CANADA>
1. Drill in the break-off bolt a hole deep enough for the tap to stand.
2. Remove the break-off bolt with a left-hand tap.
INSTALLATION SERVICE POINTS
>>A<< BREAK-OFF BOLTS INSTALLATION <VEHICLES FOR CANADA>
Tighten until the head of break-off bolt is broken off.
>>B<< INITIALIZATION PROCEDURE
Turn the ignition switch on then off, and keep it off for at least 10 seconds.
