Outlander 2WD V6-3.0L (6B31) (2007)
/Page-66002.png)
1. Disconnect all ECM connectors. Connect the check harness special tool (MB992110) between the separated connectors.
2. Connect the oscilloscope probe to each check harness connector terminal to analyze each cylinder:
-
Terminal No. 4 for the number 1 cylinder.
-
Terminal No. 5 for the number 2 cylinder.
-
Terminal No. 20 for the number 3 cylinder.
-
Terminal No. 21 for the number 4 cylinder.
-
Terminal No. 52 for the number 5 cylinder.
-
Terminal No. 53 for the number 6 cylinder.
Standard Wave Pattern
Standard wave pattern
