Outlander 2WD V6-3.0L (6B31) (2007)
Removal Steps 1-6
DRIVER'S AIR BAG MODULE AND CLOCK SPRING
CATION: On vehicles with ASC, always carry out steering wheel sensor calibration after the clock spring has been installed (Refer to On-vehicle
Service-Steering Wheel Sensor Calibration). This is necessary because the ASC-ECU should update the steering neutral point.
Required Special Tools:
-
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
-
MB991824:Vehicle Communication Interface (V.C.I.)
-
MB991827:M.U.T.-III USB Cable
-
MB991910:M.U.T.-III Main Harness A
-
MB992006: Extra Fine Probe
-
MB990803: Steering Wheel Puller