Outlander 2WD V6-3.0L (6B31) (2007)
2. Turn the ignition switch to the "ON" position.
3. Does the "SRS" warning light illuminate for approximately seven seconds, and go out?
4. If yes, the SRS system is functioning properly. If not, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - SRS Warning Light Check.
INSPECTION
WARNING: If a dent, crack, deformation or rust is detected, replace with a new sensor.
NOTE: For checking of the seat slide sensor other than described below, refer to the section concerning SRS diagnosis.
1. Check the seat slide sensor for dent, cracks or deformation.
2. Check the connector for damage, and terminals for deformation.
3. Check that there is no bending or corrosion in the slide adjuster.