mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Procedures|Page 4736 > < Battery Check|Page 4733
Page 1
background image

Battery: Procedures

Battery Charging

BATTERY CHARGING

WARNING:  When batteries are being charged, an explosive gas forms beneath the cover of each cell. Do not smoke near batteries on charge
or which have recently been charged. Do not break live circuits at the terminals of the batteries on charge. A spark will occur where the live
circuit is broken. Keep all open flames away from the battery.

Battery electrolyte temperature may temporarily be allowed to rise to 55 °C (131 °F). Increase of electrolyte temperature above 55 °C (131 °F) is
harmful to the battery, causing deformation of battery cell, decrease in life of battery, etc.

Charge Rate Chart

CHARGE RATE

If the test indicator is white, the battery should be charged as outlined below. When the dot appears or when maximum charge shown below is reached,
charging should be stopped.

Battery Handling

BATTERY HANDLING

WARNING:  Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.

When checking or servicing does not require power from the vehicle battery, be sure to disconnect the cable from the battery (-) terminal. This will
prevent problems that could be caused by a short circuit. Disconnect the (-) battery terminal first and reconnect it last.

Procedures|Page 4736 > < Battery Check|Page 4733