Outlander 2WD V6-3.0L (6B31) (2007)
Steering Gear: Removal and Replacement
POWER STEERING GEAR BOX AND LINKAGE
REMOVAL AND INSTALLATION
CAUTION:
^
Before removing the steering wheel and airbag module, refer to Service Precautions and Airbag Module and Clock Spring. Position the
front wheels in a straight ahead direction. If you fail to do this, the clock spring for SRS may be damaged, making the SRS (air bag)
inoperable which may cause serious injury to the driver.
^
*The bolts and nuts marked with * are coated with the friction coefficient stabilizer. When removed these parts, make sure that they are
free of damage, remove any dust and dirt on the bearing surfaces and the threads, and tighten to the specified torque.
Pre-removal & Post-installation Operation
Removal Steps 1-2