Outlander 2WD V6-3.0L (6B31) (2007)
Transmission Mount: Description and Operation
POWER PLANT MOUNT
GENERAL INFORMATION
For the power plant support, the inertial axis four-point mounting system is utilized, and the system has the following features.
^
For the engine and transaxle mountings, the cylindrical liquid seal mountings are used. This reduces idling vibration and acceleration noise, and
improves riding comfort.
^
For the engine mounting bracket, light weight and high rigidity aluminum is used to reduce acceleration noise.
^
For the transaxle mounting bracket, light weight and high rigidity sheet metal is used to reduce gear noise.
^
For the front and rear roll stoppers, insulators developed for 6A/T are utilized. This reduces idling vibration and acceleration/deceleration shock.
^
A flat crossmember improves steering ability.
CONSTRUCTION DIAGRAM