Outlander 2WD V6-3.0L (6B31) (2007)
Power Window Control Module: Technical Service Bulletins
Body - Driver's Door Window Initialization
No: TT-133-54-014
DATE: December, 2006
MODEL: See Below
SUBJECT
DRIVER'S DOOR WINDOW AUTO UP/DOWN INITIALIZATION
Driver's Door Window Auto up/down Initialization - 2007 Outlander. If the driver's door window will not go all the way up or down when using the auto
up/down function, the up/down stop position needs to be initialized. Follow the procedure below to initialize the up/down stop position:
1. Turn the ignition key to the ON position.
2. Push and hold the power window switch in the down position until the window reaches the full down position.
3. Lift up and hold the power window switch in the up position until the window is in the full up position.
4. Verify proper operation of the auto up/down feature.