Outlander 4WD L4-2.4L (4B12) (2008)
Insert the O-ring to the water inlet pipe, and coat the outer portion of the O-ring with water or engine coolant.
]]B[[ GASKET/THERMOSTAT HOUSING INSTALLATION
Using the special tool MD998412, install the thermostat housing while supporting the gasket.
]]C[[ ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION
1. Apply the specified sealant to the thread of the engine coolant temperature sensor.
Specified Sealant: Three bond 1324N, Loctite 262 or equivalent
2. Use special tool MB992042 to install the engine coolant temperature sensor.