mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 6776 > < Reading and Clearing Diagnostic Trouble Codes|Page 6774
Page 9
background image

Check that the rear dome light bulb is normal.

Q: Does rear dome light work normal?

YES : Go to Step 6.

NO : Replace the rear dome light bulb.

STEP 6. Check ETACS-ECU connector C-316 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Is ETACS-ECU connectors C-316 in good condition?

YES : Go to Step 7.

NO : Repair the damaged parts.

STEP 7. Check the wiring harness between rear dome light D-10 connector terminal (No. 1/2) and ETACS-ECU connector C-316 (terminal No.
6/5)

Q: Is wiring harness between rear dome light connector D-10 (terminal No. 1/2) and ETACS-ECU connector C-316 (terminal No. 6/5) in good
condition?

YES : Go to Step 8.

NO : Repair the wiring harness.

STEP 8. Retest the system

Check that the rear dome light illuminates/extinguishes normally.

Q: Does rear dome light work normal?

YES : The trouble can be an intermittent malfunction (Refer to general (Body and Chassis) How to use Troubleshooting/inspection Service Points
How to Cope with Intermittent Malfunction).

NO : Replace the ETACS-ECU.

Inspection Procedure 3

Inspection Procedure 3: The Luggage Compartment Light Does Not Illuminate Normally.

Reading and Clearing Diagnostic Trouble Codes|Page 6776 > < Reading and Clearing Diagnostic Trouble Codes|Page 6774