Outlander 4WD L4-2.4L (4B12) (2008)
CAUTION: Avoid adhesion of engine oil or grease to the O-ring.
Fit the O-ring in the water inlet pipe groove, wet the O-ring circumference or the pipe mounting area inner wall, and then insert the O-ring.
]]B[[ ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION
1. Apply the specified sealant to the thread of the engine coolant temperature sensor.
Specified Sealant: Three bond 1324N, Loctite 262 or equivalent
2. Use special tool water temp sensor wrench (MB992042) to tighten the engine coolant temperature sensor to the specified torque.
Tightening torque: 30 ± 9 Nm
]]C[[ RADIATOR UPPER HOSE CONNECTION