Outlander 4WD L4-2.4L (4B12) (2008)
Make mating marks on the radiator hose and the hose clamp. Disconnect the radiator hose.
[[B]] ENGINE COOLANT TEMPERATURE SENSOR REMOVAL
Use special tool MB992042 to remove the engine coolant temperature sensor.
[[C]] THERMOSTAT HOUSING REMOVAL
Remove the two control wiring harness clamps, and remove the thermostat housing.
INSTALLATION SERVICE POINTS
]]A[[ O-RING INSTALLATION
CAUTION: Do not allow engine oil or other grease to adhere to the O-ring