Outlander 4WD L4-2.4L (4B12) (2008)
/Page-633120.png)
YES (vehicles without hands-free cellular phone system) : Go to Step 8.
YES (vehicles with hands-free cellular phone system) : Go to Step 7.
NO : Go to Step 52.
STEP 7. Check the wiring harness between joint connector (CAN1) C-103 and hands free module connector C-121 for a short to ground.
Measure the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 7 and body ground.
OK: 1 kilo ohm or more
3. Measure the resistance between joint connector (CAN1) terminal 20 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES : Go to Step 8.
NO : Go to Step 53.
STEP 8. Check the wiring harness between joint connector (CAN1) C-103 and A/C-ECU connector C-109 for a short to ground. Measure the
resistance at joint connector (CAN 1) C-103.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
