Outlander 4WD L4-2.4L (4B12) (2008)
STEP 45. Check the wiring harness between joint connector (CAN1) C-103 and CAN box unit connector C-13.
1. Disconnect joint connector (CAN1) C-103 and CAN box unit connector C-13, and check the wiring harness.
2. Check the wiring harness between joint connector (CAN1) C-103 (terminal No.10) and CAN box unit connector C-13 (terminal No.3)
3. Check the wiring harness between joint connector (CAN1) C-103 (terminal No.21) and CAN box unit connector C-13 (terminal No. 13)
Q: Is the wiring harness between joint connector (CAN1) C-103 and CAN box unit connector C-13 in good condition?
YES (vehicles without satellite radio) : Go to Step 47.
YES (vehicles with satellite radio) : Go to Step 46.
NO : Go to Step 56.
STEP 46. Check the wiring harness between joint connector (CAN1) C-103 and satellite radio tuner connector C-111.
1. Disconnect joint connector (CAN1) C-103 and satellite radio tuner connector C-111, and check the wiring harness.
2. Check the wiring harness between joint connector (CAN1) C-103 (terminal No.10) and satellite radio tuner connector C-111 (terminal No.3)
3. Check the wiring harness between joint connector (CAN1) C-103 (terminal No.21) and satellite radio tuner connector C-111 (terminal No.13)
Q: Is the wiring harness between joint connector (CAN1) C-103 and satellite radio tuner connector C-111 in good condition?
YES : Go to Step 47.
NO : Go to Step 57.
STEP 47. Check the wiring harness between joint connector (CAN1) C-103 and ETACS-ECU connector C-301.
1. Disconnect joint connector (CAN 1) C-103 and ETACS-ECU connector C-301, and check the wiring harness.
2. Check the wiring harness between joint connector (CAN1) C-103 (terminal No.6) and ETACS-ECU connector C-301 (terminal No.6)
3. Check the wiring harness between joint connector (CAN1) C-103 (terminal No.17) and ETACS-ECU connector C-301 (terminal No.7)
Q: Is the wiring harness between joint connector (CAN1) C-103 and ETACS-ECU connector C-301 in good condition?
YES : Go to Step 58.
NO : Repair the wiring harness between joint connector (CAN1) C-103 and ETACS-ECU connector C-301.
STEP 48. Using scan tool MB991958, diagnose the CAN bus line,(checking the combination meter for internal failure)
CAUTION:
-
Strictly observe the specified wiring harness repair procedure.
-
To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or
disconnecting scan tool MB991958.
1. Disconnect combination meter connector C-03.