Outlander AWD L4-2.4L (4B12) (2010)
Rear View Camera Circuit (Part 2)
COMMENTS ON TROUBLE SYMPTOM
When the screen of rear view camera is not shown even if the selector lever is "R" (Reverse) position, the rear view camera, the wiring harness,
connectors, transmission range switch or multivision display may be defective.
PROBABLE CAUSES
-
Damaged harness wires and connectors
-
Malfunction of the transmission range switch
-
Malfunction of the rear view camera
-
Malfunction of the multivision display
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
-
MB992006: Extra Fine Probe
-
MB991958: Scan Tool (M.U.T.-III Sub Assembly)