Outlander AWD L4-2.4L (4B12) (2010)
Speaker: Testing and Inspection
ON-VEHICLE SERVICE
SPEAKER TEST
SPEAKER CONNECTION CHECK MODE [VEHICLES WITHOUT MMCS]
Enter the speaker connection check mode according to the following steps:
1. Turn the Ignition switch to the "ACC" or "ON" position and switch off the radio and CD player or CD changer.
2. Press the following buttons in that order within sixty seconds from step (1).
1. [CH1] button
2. Rewind button
3. Fast-forward button
4. [CH6] button
3. Check that the speaker, which is displayed on the center panel display, sounds (If the [CH6] button is pressed, the speaker will be changed).
NOTE: The display of "FL", "FR", "RL", "RR","RW" blinks.