Outlander AWD L4-2.4L (4B12) (2010)
/Page-1441004.png)
STEP 3. Check clock spring connector C-202 and C-204 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Are clock spring connector C-202 and C-204 in good condition?
YES: Go to STEP 4.
NO : Repair or replace the damaged component(s).
STEP 4. Check the clock spring.
Check whether the clock spring is in good condition.
Q: Is the check result normal?
YES: Go to STEP 5.
NO : Replace the clock spring.
STEP 5. Check radio and CD player connector C-16 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is radio and CD player connector C-16 in good condition?
YES: Go to Step 6.
NO : Repair or replace the damaged component(s).
STEP 6. Check the wiring harness between radio and CD player connector C-16 (terminal 22, 32) and clock spring connector C-204 (terminal
2, 3).
-
Check the communication lines for open and short circuit.
Q: Is the wiring harness between radio and CD player connector C-16 (terminal 22, 32) and clock spring connector C-204 (terminal 2, 3) in good
condition?
YES: Go to STEP 7.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 7. Check steering wheel audio remote control switch connector C-213 for loose, corroded or damaged terminals, or terminals pushed
back in the connector.
Q: Is steering wheel audio remote control switch connector C-213 in good condition?
YES: Go to STEP 8.
NO : Repair or replace the damaged component(s). The steering wheel audio remote control switch should work normally.
STEP 8. Check the wiring harness between steering wheel audio remote control switch connector C-213 (terminal 2, 4) and clock spring
connector C-202 (terminal 5, 4).
-
Check the communication lines for open and short circuit.
Q: Is the wiring harness between steering wheel audio remote control switch connector C-213 (terminal 2, 4) and clock spring connector C-202
(terminal 5, 4) in good condition?
YES: go to STEP 9.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 9. Retest the system
Check whether you can operate the radio and CD player by using the steering wheel audio remote control switch.
Q: Is the check result normal?
