Outlander AWD L4-2.4L (4B12) (2010)
Post-installation Operation
Removal Steps 1-5
INSTALLATION SERVICE POINTS
>>A<< LIFTGATE WEATHERSTRIP INSTALLATION
1. The marking on the liftgate weatherstrip should be positioned at the center of the liftgate lower.
2. Install the weatherstrip according to the order shown in the figure.
3. Install the weatherstrip according to the direction shown by the arrow in the figure.
>>B<< STRIKER INSTALLATION
Install the striker so that the striker center does not deviate more than ±1.5 mm (0.06 in) from the latch center.