Outlander AWD L4-2.4L (4B12) (2010)
Cross-Member: Service and Repair
Engine Roll Stopper and Center Member
ENGINE ROLL STOPPER AND CENTER MEMBER
REMOVAL AND INSTALLATION
CAUTION
^
*1: Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full
weight of the engine and transaxle assembly on the vehicle body.
^
*2: Indicates parts are the bolts with friction coefficient stabilizer. In removal, ensure there is no damage, clean dust and soiling from
bearing and thread surfaces, and tighten them to the specified torque.
Pre-removal & Post-installation Operation
Removal Steps 1-4
INSTALLATION SERVICE POINT
[A] FRONT ROLL STOPPER INSTALLATION