Outlander AWD L4-2.4L (4B12) (2010)
Install the adjuster assemblies. The shoe adjusting bolt should be mounted to the rear of the vehicle for the right wheel, and to the front of the vehicle
for the left wheel.
[D] SHOE-TO-ANCHOR SPRING INSTALLATION
The shoe-to-anchor springs are not interchangeable because their spring loads are different. The one with blue paint mark should be installed to the
front of the vehicle, and the other with yellow paint to the rear of the vehicle, respectively.
Brake Lining Thickness Check
PARKING BRAKE LINING AND DRUM
BRAKE LINING THICKNESS CHECK