Outlander AWD L4-2.4L (4B12) (2010)
3. Press the "COAST/SET" switch.
4. Check to be sure that when the "COAST/SET" switch is released the speed is the constant speed.
NOTE: If the vehicle speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, it is normal
for the auto-cruise control to be cancelled. When the vehicle speed becomes low-speed limit [approximately 40 km/h (25 mph)] or less, driving at
constant speed will be cancelled even if the vehicle speed does not decrease 15 km/h (9 mph) or more.
SPEED-INCREASE SETTING
1. Press the "ON/OFF" switch (cruise control system: ON, "CRUISE" indicator light: illuminated).
2. Set to the desired speed, above approximately 40 km/h (25 mph).
3. Press the "ACC/RES" switch.
4. Check to be sure that acceleration continues while the "ACC/RES" switch is pressed, and that the speed at the time it was released becomes the
constant driving speed.
NOTE: Acceleration can be continued even if the vehicle speed has passed the high-speed limit [approximately 160 km/h (100 mph)]. But the
constant driving speed when the "ACC/RES" switch is released will be recorded as the high-speed limit.
SPEED-REDUCTION SETTING
1. Press the "ON/OFF" switch (cruise control system: ON, "CRUISE" indicator light: illuminated).
2. Set to the desired speed, above approximately 40 km/h (25 mph).
3. Press the "COAST/SET" switch.
4. Check to be sure that deceleration continues while the "COAST/SET" switch is pressed, and that the speed at the time it was released becomes the
constant driving speed.
NOTE: When the vehicle speed reaches the low limit [approximately 40 km/h (25 mph)] during deceleration, the cruise control will be cancelled.
RETURN TO THE SET SPEED BEFORE CANCELLATION AND CRUISE CONTROL CANCELLATION
1. Press the "ON/OFF" switch (cruise control system: ON, "CRUISE" indicator light: illuminated).
2. Set to the desired speed, above approximately 40 km/h (25 mph).
3. When any of the following operations are performed while at constant speed during cruise control, check if normal driving is resumed and
deceleration occurs.