Outlander AWD L4-2.4L (4B12) (2010)
Removal Steps 1-10
REMOVAL SERVICE POINT
[[A]] EXHAUST MANIFOLD NUT/EXHAUST MANIFOLD WASHER/EXHAUST MANIFOLD/EXHAUST MANIFOLD COVER
(LOWER) REMOVAL [AWD]
1. Remove the mounting bolts of the exhaust manifold cover (lower) and move them to the position where they will not interfere with the loosening
of the exhaust manifold nuts.
2. Loosen the exhaust manifold nuts, and remove the exhaust manifold nuts and the exhaust manifold washers.
3. Remove the exhaust manifold and the exhaust manifold cover (lower) as a set.
INSTALLATION SERVICE POINTS