Outlander AWD L4-2.4L (4B12) (2010)
8. Drive the vehicle until the transmission fluid is warmed up to the normal operating temperature 70 - 80°C (158 - 176° F), and check the
transmission fluid level. It must be within the "H" area on the oil level gauge.
NOTE: The "C" level is for reference only. Use the "H" level as the criteria.
NOTE: Use scan tool MB991958 to measure the transmission fluid temperature.
NOTE:
When a certain amount of time is required to warm up the transmission fluid to the normal operating temperature 70 - 80 °C (158 - 176 °F),
check the oil level referring to the characteristics chart.
9. Adjust the transmission fluid level to the specified level. Refill the transmission fluid when the fluid level is low, and drain the transmission fluid
through the drain plug when the fluid level is high.
10. Securely insert the oil level gauge into the oil filler tube.
11. TCM records the deterioration level of the transmission fluid. After replacing the transmission fluid with new one, use scan tool MB991958 to
reset the deterioration level recorded in TCM.