Outlander AWD L4-2.4L (4B12) (2010)
/Page-611006.png)
YES : Go to Step 6.
NO : Repair the wiring harness between data link connector C-125 and ETACS-ECU connector C-301.
STEP 6. Using scan tool MB991958, diagnose the CAN bus line.
CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or
disconnecting scan tool MB991958.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Diagnose CAN bus lines, and check if the scan tool screen is as shown in the illustration.
Q: Does the scan tool screen correspond to the illustration?
